The article is subject to a minimum purchase quantity of
Piece.
Our B2B+ program
Top products at reduced prices & many advantages for electricians, solar installers and wholesalers.
Bargain hunters beware!
All our top products at reduced prices! Save with power: PV deals that make you shine!
Technical specifications
Scope of delivery
data sheet
Special features & advantages:
✔ Specially developed for slate roofs and Ethernit shingles
✔ Metal replacement plate (25×38 cm galvanized) included in the set – optimal sealing & pressure distribution
✔ Hanger bolt system with EPDM seal and height adjustment
✔ Extremely stable aluminum triangular rails X40/X50/X60 – also available in black
✔ Click terminals with grounding pins for quick module installation (30–46 mm frame depth)
✔ Suitable for snow and wind load zones (XWS variant for increased requirements)
✔ CE-certified & developed in Austria
Technical data – complete substructure set for slate and Ethernit shingle roofs |
|
|---|---|
| System: | COMPACTPITCH XW / XWS – rail-based PV mounting system with hanger bolts and metal replacement plate |
| Roof type: | Slate, Ethernit shingles, corrugated fiber cement – with metal replacement plate |
| Metal replacement plate: | Galvanized, 25 × 38 cm, pre-assembled under the hanger bolt |
| Module frame height: | 30–46 mm or frameless |
| Mounting type: | Roof parallel, horizontal or cross-connected |
| Distance to roof surface: | At least 100 mm |
| Distance from roof edge: | No minimum distance required (food and beverage zones can be used) |
| Maximum roof pitch: | Up to 60°, with suitable modules even higher |
| Field sizes: | Min. 1 module, max. approx. 12 m with continuous rail |
| Wind load (suction): | Up to 2.4 kN/m² (System XW / XWS) |
| Snow load (pressure): | Up to 3.6 kN/m² in cross bond |
| System check: | Software-supported according to EN 1991 / CE-compliant |
Dimensions & Packaging |
|
|---|---|
| Hanger bolt lengths: | 180mm, 200mm, 250mm, 300mm |
| Hanger bolt diameter: | M10 / M12 (screw-in depth: min. 40–48 mm) |
| Metal replacement plate size: | 250 × 380 mm (galvanized) |
| Packaging: | Modular, flat & stackable – ideal for transport and storage |
A notice:
The structural load-bearing capacity of the roof structure must be ensured on site. Installation is carried out by trained specialists in accordance with AEROCOMPACT specifications. For slate or fiber cement panels, the use of the supplied galvanized metal replacement plate is mandatory.
| Roof type | Article number | component | Number |
|---|---|---|---|
| Ethernit shingle/slate roof 9x2 | 701902 | Aerocompact CLP-M cable tie clip module | 100 |
| 705101-3300 | Aerocompact X40-3300 mounting rail 3300mm | 14 | |
| 705202 | Aerocompact XPCN rail connector X40,X50 | 20 | |
| 705203 | Aerocompact XCL40 end cap left for rail X40 | 4 | |
| 705204 | Aerocompact XCR40 end cap right for rail X40 | 4 | |
| 705403 | Aerocompact XW12200 hanger screw M12x200 angle mount. | 43 | |
| 706457 | Aerocompact CLP-R cable clip rail | 150 | |
| 707603 | Aerocompact CLEB10 end clamp Click 30-46 black | 10 | |
| 707611 | Aerocompact CLMB10 center clamp Click 30-46 black | 40 | |
| MTP SCHF vz | MARZARI metal replacement plate for stick screw 25x38 cm galvanized | 43 | |
| Ethernit shingle/slate roof 6x3 | 701902 | Aerocompact CLP-M cable tie clip module | 100 |
| 705101-3300 | Aerocompact X40-3300 mounting rail 3300mm | 17 | |
| 705202 | Aerocompact XPCN rail connector X40,X50 | 20 | |
| 705203 | Aerocompact XCL40 end cap left for rail X40 | 6 | |
| 705204 | Aerocompact XCR40 end cap right for rail X40 | 6 | |
| 705403 | Aerocompact XW12200 hanger screw M12x200 angle mount. | 38 | |
| 706457 | Aerocompact CLP-R cable clip rail | 150 | |
| 707603 | Aerocompact CLEB10 end clamp Click 30-46 black | 20 | |
| 707611 | Aerocompact CLMB10 center clamp Click 30-46 black | 30 | |
| MTP SCHF vz | MARZARI metal replacement plate for stick screw 25x38 cm galvanized | 38 | |
| Ethernit shingle/slate roof 3x6 | 701902 | Aerocompact CLP-M cable tie clip module | 100 |
| 705101-3300 | Aerocompact X40-3300 mounting rail 3300mm | 16 | |
| 705202 | Aerocompact XPCN rail connector X40,X50 | 20 | |
| 705203 | Aerocompact XCL40 end cap left for rail X40 | 12 | |
| 705204 | Aerocompact XCR40 end cap right for rail X40 | 12 | |
| 705403 | Aerocompact XW12200 hanger screw M12x200 angle mount. | 50 | |
| 706457 | Aerocompact CLP-R cable clip rail | 150 | |
| 707603 | Aerocompact CLEB10 end clamp Click 30-46 black | 30 | |
| 707611 | Aerocompact CLMB10 center clamp Click 30-46 black | 30 | |
| MTP SCHF vz | MARZARI metal replacement plate for stick screw 25x38 cm galvanized | 50 |
Download PDF We will be happy to advise you on the subject
Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.
CUSTOMERS WHO VIEWED THIS PRODUCT
ALSO BOUGHT
100% customer satisfaction
Thats what our customers say
- Choosing a selection results in a full page refresh.
!