Technical specifications
Scope of delivery
data sheet
Special features & advantages:
✔ Aerodynamically optimized PV mounting system for east/west orientation on flat roofs
✔ Pre-assembled PES building protection mat – no roof penetration necessary
✔ Extremely fast installation: 1 kWp in about 5 minutes with 2 people
✔ Compact transport units and reduced material usage
✔ Wind tunnel tested & software-supported design
✔ Optionally available with roof anchor (hybrid solution) or as alpine version
✔ Developed & produced in Austria – 25-year warranty
Technical data – Flat roof east/west substructure complete set |
|
|---|---|
| System: | COMPACTFLAT S10 PLUS – aerodynamic east/west system with 10° elevation |
| Area of application: | Flat roofs with foil or bitumen waterproofing, also with insulation or on concrete roofs |
| Module dimensions: | 950–1150 mm width × 1500–2250 mm length |
| Installation angle: | 10° |
| Distance to roof surface: | Approx. 60 mm |
| Distance from roof edge: | Minimum 1200 mm (reduction possible on request) |
| Max. roof pitch: | Up to 5° without roof anchors, above only with additional anchoring |
| Max. field size: | 12 × 8 double rows (192 modules) |
| Min. field size: | 1 double row with 2 modules each |
| Wind load: | Up to 2.4 kN/m² suction load |
| Snow load: | Standard: up to 2.4 kN/m² / Alpine version: up to 4.4 kN/m² |
| System check: | Stability verification by AEROTOOL – based on wind tunnel tests |
Dimensions & Materials |
|
|---|---|
| Materials: |
Aluminum EN AW 6060 T64 (supporting structure) Aluminum EN AW 6063 T66 (module clamps) Stainless steel A2-70 (screws) Alu-zinc-coated steel (ballast trays, wind deflectors) Polyester fleece (pre-assembled building protection mat) |
| Optional accessories: | Roof anchors (hybrid solution), side panels, ballast trays, cable management |
| Packaging: | Modular, easy to assemble & stackable – ideal for simple logistics |
A notice:
Before beginning installation, the structural capacity of the building and roof structure must be checked. Ballasting is performed individually using the AEROTOOL planning tool and depends on the location and wind and snow loads. For regions with particularly high wind or snow loads, we recommend the Alpine or hybrid version.
| Roof type | Article number | component | Number |
|---|---|---|---|
| Flat roof_East/West_2_Modules_x_6_Rows | 00008 | Ballast stone 30x20x6 cm with 8 kg (not included in the package!) | 23 |
| 701902 | Aerocompact CLP-M cable tie clip module | 100 | |
| 707011 | Aerocompact CLM10 middle clamp Click 30-46 | 20 | |
| 707080 | Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo | 20 | |
| 720921 | Aerocompact S10+MB-PP center support S10+ with mats | 7 | |
| 721011 | Aerocompact S10FB-PP starting foot S10 with mat | 14 | |
| 701001-200 | Aerocompact PP200/80 building protection mat 200x80x10 | 50 | |
| Flat roof_East/West_4_Modules_x_3_Rows | 00008 | Ballast stone 30x20x6 cm with 8 kg (not included in the package!) | 16 |
| 701902 | Aerocompact CLP-M cable tie clip module | 100 | |
| 707011 | Aerocompact CLM10 middle clamp Click 30-46 | 20 | |
| 707080 | Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo | 30 | |
| 720921 | Aerocompact S10+MB-PP center support S10+ with mats | 8 | |
| 720932 | Aerocompact S10+CNS-PP connector S10+ short with mat | 4 | |
| 721011 | Aerocompact S10FB-PP starting foot S10 with mat | 8 | |
| 701001-200 | Aerocompact PP200/80 building protection mat 200x80x10 | 40 | |
| Flat roof_East/West_6_Modules_x_2_Rows | 00008 | Ballast stone 30x20x6 cm with 8 kg (not included in the package!) | 16 |
| 701902 | Aerocompact CLP-M cable tie clip module | 100 | |
| 707011 | Aerocompact CLM10 middle clamp Click 30-46 | 20 | |
| 707080 | Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo | 40 | |
| 720921 | Aerocompact S10+MB-PP center support S10+ with mats | 9 | |
| 720932 | Aerocompact S10+CNS-PP connector S10+ short with mat | 6 | |
| 721011 | Aerocompact S10FB-PP starting foot S10 with mat | 6 | |
| 701001-200 | Aerocompact PP200/80 building protection mat 200x80x10 | 40 |
Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.
CUSTOMERS WHO VIEWED THIS PRODUCT
100% customer satisfaction
!
🇩🇪 Deutschland: Infos zum Nullsteuersatz
🇦🇹 Österreich: Infos zum Nullsteuersatz
Hinweis: Steuern werden im Checkout auf Basis Ihrer Angaben berechnet und nach Bestelleingang nochmals manuell überprüft.