18 modules flat roof south substructure 8kWp

€1.443,73 exkl. USt.
SKU: Flachdach_Süd_2_Module_x_9_Reihen
Taxes and shipping calculated at checkout
×
Prices plus shipping costs

Tax info read more

Questions to the product?
In stock and ready for shipping
model: 2 modules in 9 rows

WhatsApp-Support

Buyer protection ⭐⭐⭐⭐⭐
Product description

The substructure for south-facing flat roofs with 18 PV modules (approx. 8 kWp) is a highly efficient solution for installing photovoltaic systems on flat roofs. The system was specifically designed for south-facing installations and offers an optimal balance between yield, space utilization, and wind load resistance.

The construction consists of robust, corrosion-resistant aluminum profiles and stainless steel connectors and is designed for permanent, secure attachment without penetrating the roof. The low-ballast design with an optimized pitch (typically 10–15°) minimizes shading while ensuring high energy yields – even with small roof areas.

Thanks to pre-assembled components, an intelligent click system, and sophisticated module guidance, the system can be installed quickly and easily. The aerodynamic design reduces wind loads and provides additional stability – without the need for additional roof anchoring. The substructure is ideal for plastic or bitumen waterproofing, as well as membrane and gravel roofs.

South-facing installation is particularly economical for systems with consistent daily power consumption. The system is compatible with all common standard modules (60–120 cells) and meets the requirements of DIN EN 1991 (Eurocode) regarding snow and wind loads.

18 modules flat roof south substructure 8kWp

18 modules flat roof south substructure 8kWp

2 modules in 9 rows

€1.443,73 exkl. USt.
2 modules in 9 rows

Technical specifications

Scope of delivery

Data sheet

Special features & advantages:
✔ Aerodynamically optimized PV mounting system for south-facing flat roof systems
✔ Pre-assembled building protection mat (PES) – no roof penetration required
✔ Fast installation: 1 kWp in about 5 minutes with 2 people
✔ Compatible with ballast trays, roof anchors and hybrid solutions for higher loads
✔ Optionally available as an alpine version for snow loads up to 4.4 kN/m²
✔ Software-supported statics tested with wind tunnel testing
✔ Developed in Austria – 25-year guarantee

Technical data – Flat roof south substructure complete set
System: COMPACTFLAT S10 – south-facing, aerodynamic ironing system
Area of ​​application: Flat roofs with foil, bitumen or concrete – with or without thermal insulation
Module dimensions: 950-1150mm × 1500-2250mm
Installation angle: 10° (standard), also available in 15°
Distance to roof surface: Approx. 60 mm
Distance from roof edge: Min. 1200 mm (reduction possible on request)
Max. roof pitch: Up to 5° without roof anchors, above with additional anchoring
Max. field size: 12 rows × 10 modules = 120 modules
Min. field size: 1 row with 2 modules
Wind load (suction): Up to 2.4 kN/m²
Snow load (pressure): Standard: 2.4 kN/m² / Alpine: up to 4.4 kN/m²
System check: Stability verification by AEROTOOL, based on wind tunnel tests

Dimensions & Materials
Materials: Aluminum EN AW 6060 T64 (bracket)
Aluminum EN AW 6063 T66 (module clamps)
Stainless steel A2-70 (screws)
Steel with aluminum-zinc coating (ballast trays & wind deflectors)
PES building protection mat (pre-assembled)
Optional components: Ballast trays, ballast stones, side plates, roof anchors, cable ducts
Packaging: Modular, pre-assembled, stackable – for easy logistics

A notice:
The roof structure must be tested on site for sufficient load-bearing capacity. Ballasting is carried out according to the project-specific design using AEROTOOL. In areas with increased wind loads or seismic activity, a hybrid solution with roof anchoring is recommended.

Roof type Article number component Number
Flat roof south 2 modules x 9 rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 101
701562 Aerocompact SCS8x20 self-tapping combination screw M8x20 100
701901 Aerocompact CLP-WD clip for wind deflectors 100
701902 Aerocompact CLP-M cable tie clip module 100
706001-2050 Aerocompact BT-2050 ballast tray long 2050mm 17
706101-2050 Aerocompact S10WD-2050 wind deflector 10° 2050mm 18
707011 Aerocompact CLM10 middle clamp Click 30-46 20
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 40
721011 Aerocompact S10FB-PP starting foot S10 with mat 3
721021 Aerocompact S10EB-PP end foot S10 with mat 3
721032 Aerocompact S10CNS-PP connector S10/25 with mat 24
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 80
Flat roof south 3 modules x 6 rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 117
701562 Aerocompact SCS8x20 self-tapping combination screw M8x20 100
701901 Aerocompact CLP-WD clip for wind deflectors 100
701902 Aerocompact CLP-M cable tie clip module 100
706001-2050 Aerocompact BT-2050 ballast tray long 2050mm 12
706101-2050 Aerocompact S10WD-2050 wind deflector 10° 2050mm 21
707011 Aerocompact CLM10 middle clamp Click 30-46 30
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 30
721011 Aerocompact S10FB-PP starting foot S10 with mat 4
721021 Aerocompact S10EB-PP end foot S10 with mat 4
721032 Aerocompact S10CNS-PP connector S10/25 with mat 24
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 70
Flat roof south 6 modules x 3 rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 106
701562 Aerocompact SCS8x20 self-tapping combination screw M8x20 100
701901 Aerocompact CLP-WD clip for wind deflectors 100
701902 Aerocompact CLP-M cable tie clip module 100
706001-2050 Aerocompact BT-2050 ballast tray long 2050mm 8
706101-2050 Aerocompact S10WD-2050 wind deflector 10° 2050mm 18
707011 Aerocompact CLM10 middle clamp Click 30-46 30
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 20
721011 Aerocompact S10FB-PP starting foot S10 with mat 7
721021 Aerocompact S10EB-PP end foot S10 with mat 7
721032 Aerocompact S10CNS-PP connector S10/25 with mat 14
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 60
Flat roof south 9 modules x 2 rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 106
701562 Aerocompact SCS8x20 self-tapping combination screw M8x20 100
701901 Aerocompact CLP-WD clip for wind deflectors 100
701902 Aerocompact CLP-M cable tie clip module 100
706001-2050 Aerocompact BT-2050 ballast tray long 2050mm 5
706101-2050 Aerocompact S10WD-2050 wind deflector 10° 2050mm 18
707011 Aerocompact CLM10 middle clamp Click 30-46 40
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 10
721011 Aerocompact S10FB-PP starting foot S10 with mat 10
721021 Aerocompact S10EB-PP end foot S10 with mat 10
721032 Aerocompact S10CNS-PP connector S10/25 with mat 10
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 60

PDF icon Download PDF

We will be happy to advise you on the subject

Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.

Ask a Question About Us

100% customer satisfaction

Thats what our customers say

Rate on google