24 modules flat roof east/west substructure 10kWp

SKU: Flachdach_Ost/West_12_Module_x_2_Reihen

€924,74 exkl. USt.
SKU: Flachdach_Ost/West_12_Module_x_2_Reihen
Taxes and shipping calculated at checkout
×
Questions to the product?
In stock and ready for shipping
Lieferzeit: 1-4 Werktage
model: 12 modules in 2 rows

WhatsApp-Support

Buyer protection ⭐⭐⭐⭐⭐
Product description

The substructure for flat roofs east/west facing with 24 PV modules (approx. 10 kWp) is the ideal solution for maximum space efficiency and consistent power production throughout the day. The system was specifically developed for parallel east and west orientation and is ideal for roofs with limited space or low pitches.

The construction consists of durable, weather-resistant aluminum profiles and stainless steel connectors. It allows for ballasted installation without roof penetration and is particularly suitable for foil, bitumen, and gravel roofs. The symmetrical arrangement ensures optimal roof area utilization, reduced shading, and balanced load distribution.

With a typical module tilt of approximately 10°, the system achieves a good balance between energy yield, wind stability, and aerodynamic performance. The pre-assembled components and the intelligent click system enable quick and easy installation, significantly reducing installation times.

The east/west orientation distributes the generated solar power more evenly throughout the day—ideal for households or businesses with increased power demand in the morning and evening. The system is compatible with all common PV module sizes (60–120 cells) and meets current wind and snow load standards according to DIN EN 1991 (Eurocode).

Compatible with inverters from leading manufacturers such as SMA, Fronius, Kostal, GoodWe, Huawei and Sungrow.

24 modules flat roof east/west substructure 10kWp

24 modules flat roof east/west substructure 10kWp

12 modules in 2 rows

€924,74 exkl. USt.
12 modules in 2 rows

Technical specifications

Scope of delivery

data sheet

Special features & advantages:
✔ Aerodynamically optimized PV mounting system for east/west orientation on flat roofs
✔ Pre-assembled PES building protection mat – no roof penetration necessary
✔ Extremely fast installation: 1 kWp in about 5 minutes with 2 people
✔ Compact transport units and reduced material usage
✔ Wind tunnel tested & software-supported design
✔ Optionally available with roof anchor (hybrid solution) or as alpine version
✔ Developed & produced in Austria – 25-year warranty

Technical data – Flat roof east/west substructure complete set
System: COMPACTFLAT S10 PLUS – aerodynamic east/west system with 10° elevation
Area of ​​application: Flat roofs with foil or bitumen waterproofing, also with insulation or on concrete roofs
Module dimensions: 950–1150 mm width × 1500–2250 mm length
Installation angle: 10°
Distance to roof surface: Approx. 60 mm
Distance from roof edge: Minimum 1200 mm (reduction possible on request)
Max. roof pitch: Up to 5° without roof anchors, above only with additional anchoring
Max. field size: 12 × 8 double rows (192 modules)
Min. field size: 1 double row with 2 modules each
Wind load: Up to 2.4 kN/m² suction load
Snow load: Standard: up to 2.4 kN/m² / Alpine version: up to 4.4 kN/m²
System check: Stability verification by AEROTOOL – based on wind tunnel tests

Dimensions & Materials
Materials: Aluminum EN AW 6060 T64 (supporting structure)
Aluminum EN AW 6063 T66 (module clamps)
Stainless steel A2-70 (screws)
Alu-zinc-coated steel (ballast trays, wind deflectors)
Polyester fleece (pre-assembled building protection mat)
Optional accessories: Roof anchors (hybrid solution), side panels, ballast trays, cable management
Packaging: Modular, easy to assemble & stackable – ideal for simple logistics

A notice:
Before beginning installation, the structural capacity of the building and roof structure must be checked. Ballasting is performed individually using the AEROTOOL planning tool and depends on the location and wind and snow loads. For regions with particularly high wind or snow loads, we recommend the Alpine or hybrid version.

Roof type Article number component Number
Flat roof_East/West_12_Modules_x_2_Rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 28
701902 Aerocompact CLP-M cable tie clip module 100
707011 Aerocompact CLM10 middle clamp Click 30-46 30
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 70
720921 Aerocompact S10+MB-PP center support S10+ with mats 18
720932 Aerocompact S10+CNS-PP connector S10+ short with mat 15
721011 Aerocompact S10FB-PP starting foot S10 with mat 6
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 60
Flat roof_East/West_2_Modules_x_12_Rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 43
701902 Aerocompact CLP-M cable tie clip module 100
707011 Aerocompact CLM10 middle clamp Click 30-46 50
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 30
720921 Aerocompact S10+MB-PP center support S10+ with mats 13
721011 Aerocompact S10FB-PP starting foot S10 with mat 26
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 90
Flat roof_East/West_4_Modules_x_6_Rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 28
701902 Aerocompact CLP-M cable tie clip module 100
707011 Aerocompact CLM10 middle clamp Click 30-46 40
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 50
720921 Aerocompact S10+MB-PP center support S10+ with mats 14
720932 Aerocompact S10+CNS-PP connector S10+ short with mat 7
721011 Aerocompact S10FB-PP starting foot S10 with mat 14
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 60
Flat roof_East/West_6_Modules_x_4_Rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 24
701902 Aerocompact CLP-M cable tie clip module 100
707011 Aerocompact CLM10 middle clamp Click 30-46 40
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 60
720921 Aerocompact S10+MB-PP center support S10+ with mats 15
720932 Aerocompact S10+CNS-PP connector S10+ short with mat 10
721011 Aerocompact S10FB-PP starting foot S10 with mat 10
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 50
Flat roof_East/West_8_Modules_x_3_Rows 00008 Ballast stone 30x20x6 cm with 8 kg (not included in the package!) 24
701902 Aerocompact CLP-M cable tie clip module 100
707011 Aerocompact CLM10 middle clamp Click 30-46 40
707080 Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo 60
720921 Aerocompact S10+MB-PP center support S10+ with mats 16
720932 Aerocompact S10+CNS-PP connector S10+ short with mat 12
721011 Aerocompact S10FB-PP starting foot S10 with mat 8
701001-200 Aerocompact PP200/80 building protection mat 200x80x10 50

PDF icon Download PDF

We will be happy to advise you on the subject

Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.

Ask a Question About Us

100% customer satisfaction

Thats what our customers say

Rate on google