28 modules folded roof substructure 12 kWp

SKU: Falzdach_7x4

Price: €1.075,34 Exclusive vat

SKU: Falzdach_7x4

Taxes and shipping calculated at checkout

Questions to the product?

In stock and ready for shipping ⓘ

Lieferzeit: 7-10 Werktage

model: 7 modules in 4 rows

7 modules in 4 rows

Quantity

WhatsApp-Support

Bezahlen Sie in bis zu 84 monatlichen Raten. Mehr erfahren

Product description

The substructure for seam roofs with 28 PV modules is the optimal solution for photovoltaic systems with a capacity of approximately 12 kWp. It was specially developed for standing seam, double standing seam, and round seam roofs and enables secure, non-penetrative installation without compromising the roof membrane.

The system is based on durable, weather-resistant aluminum profiles and special seam clamps made of stainless steel or aluminum, which are attached directly to the seam – without drilling or screwing into the roof material. This ensures that the roof waterproofing is fully preserved and the risk of leaks is eliminated. The clamps adapt flexibly to different seam types and heights.

The substructure is suitable for solar modules with 60–120 cells and offers quick and easy installation thanks to pre-assembled components. The system is wind and snow load tested according to Eurocode and designed for long-term, maintenance-free use. The aerodynamic design also ensures high stability and low weight.

With a capacity of up to 28 modules, this solution is ideal for small PV systems on residential buildings, garages, or outbuildings with metal roofs. The discreet mounting technology ensures a clean appearance and harmonious integration into the roof design.

28 modules folded roof substructure 12 kWp

7 modules in 4 rows

Price: €1.075,34 Exclusive vat

Technical specifications

Scope of delivery

data sheet

Special features & advantages:
✔ Penetration-free installation on almost all folded sheet roofs
✔ High holding forces thanks to form-fitting seam clamps
✔ Compatible with standing seam, round seam, double standing seam, sliding seam and snap seam profiles
✔ Portrait mounting with mounting rail X40/50 possible (via cross connector)
✔ Suitable for building heights up to 200 m and roof pitches up to 70°
✔ 25-year product warranty – CE-certified – developed in Austria
✔ Optional: Stainless steel saddle for copper roofs prevents contact corrosion

Technical data – Complete substructure set for seam roof
System:	COMPACTMETAL™ TM – non-penetrating clamping system with short profile or mounting rail
Roof type:	All common folding sheet systems (standing seam, round seam, snap seam, sliding seam)
Mounting type:	Landscape (with short profile) or portrait (with X40/X50 rail & cross connector)
Module frame height:	30–46 mm (height-adjustable click clamp with grounding pins)
Installation angle:	Roof parallel
Distance to roof surface:	Depending on clamp type & rail: min. 30 mm to 90 mm
Maximum roof pitch:	Up to 70°
Maximum building height:	Up to 200 m according to Eurocode
Field size:	Landscape: vertical max. 3 modules (6 with aluminum roofing) / Portrait: horizontal max. 5 modules
Wind load (suction):	Up to 2.4 kN/m²
Snow load (pressure):	Up to 5.4 kN/m²
System check:	Software-supported according to applicable construction standards & load tests

Dimensions & Materials
Seam clamp types:	TMDS08, TMM08, TMR08, TMRD08, TMK1508, TMK2008 and others – depending on the folding type
Mounting rails (portrait option):	X40 / X50 with XPN cross connector
Material:	Aluminum EN AW-6063 T66 / Stainless steel A2-70 / EPDM seal
Packaging:	Compact, stackable units – ideal for storage & shipping

A notice:
Installation may only be carried out by qualified personnel. The structural load-bearing capacity of the roof and building must be checked on site. Compatibility of the clamp types with the existing seam profile must be ensured in advance. For copper roofs, the stainless steel saddle DSA10 is required.

Roof type	Article number	component	Number
Seam roof 7x4	701902	Aerocompact CLP-M cable tie clip module	100
	705101-3300	Aerocompact X40-3300 mounting rail 3300mm	24
	705202	Aerocompact XPCN rail connector X40,X50	20
	705203	Aerocompact XCL40 end cap left for rail X40	8
	705204	Aerocompact XCR40 end cap right for rail X40	8
	705222	Aerocompact XDL cross connector X40,X50,X60	48
	705621	Aerocompact TMDS08 double seam clamp with short rail	48
	706457	Aerocompact CLP-R cable clip rail	150
	707603	Aerocompact CLEB10 end clamp Click 30-46 black	20
	707611	Aerocompact CLMB10 center clamp Click 30-46 black	50

Download PDF

We will be happy to advise you on the subject

Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.

Ask a Question About Us