28 modules flat roof south substructure 12kWp

SKU: Flachdach_Süd_4_Module_x_7_Reihen

Price: €1.732,35 Exclusive vat

SKU: Flachdach_Süd_4_Module_x_7_Reihen

Taxes and shipping calculated at checkout

Questions to the product?

In stock and ready for shipping ⓘ

Lieferzeit: 7-10 Werktage

model: 4 modules in 7 rows

4 modules in 7 rows

€1.732,35

7 modules in 4 rows

€1.576,32

Quantity

WhatsApp-Support

Bezahlen Sie in bis zu 84 monatlichen Raten. Mehr erfahren

Product description

The substructure for south-facing flat roofs with 28 PV modules (approx. 12 kWp) is a highly efficient solution for installing photovoltaic systems on flat roofs. The system was specifically designed for south-facing installations and offers an optimal balance between yield, space utilization, and wind load resistance.

The construction consists of robust, corrosion-resistant aluminum profiles and stainless steel connectors and is designed for permanent, secure attachment without penetrating the roof. The low-ballast design with an optimized pitch (typically 10–15°) minimizes shading while ensuring high energy yields – even with small roof areas.

Thanks to pre-assembled components, an intelligent click system, and sophisticated module guidance, the system can be installed quickly and easily. The aerodynamic design reduces wind loads and provides additional stability – without the need for additional roof anchoring. The substructure is ideal for plastic or bitumen waterproofing, as well as membrane and gravel roofs.

South-facing installation is particularly economical for systems with consistent daily power consumption. The system is compatible with all common standard modules (60–120 cells) and meets the requirements of DIN EN 1991 (Eurocode) regarding snow and wind loads.

28 modules flat roof south substructure 12kWp

4 modules in 7 rows

Price: €1.732,35 Exclusive vat

Technical specifications

Scope of delivery

Data sheet

Special features & advantages:
✔ Aerodynamically optimized PV mounting system for south-facing flat roof systems
✔ Pre-assembled building protection mat (PES) – no roof penetration required
✔ Fast installation: 1 kWp in about 5 minutes with 2 people
✔ Compatible with ballast trays, roof anchors and hybrid solutions for higher loads
✔ Optionally available as an alpine version for snow loads up to 4.4 kN/m²
✔ Software-supported statics tested with wind tunnel testing
✔ Developed in Austria – 25-year guarantee

Technical data – Flat roof south substructure complete set
System:	COMPACTFLAT S10 – south-facing, aerodynamic ironing system
Area of application:	Flat roofs with foil, bitumen or concrete – with or without thermal insulation
Module dimensions:	950-1150mm × 1500-2250mm
Installation angle:	10° (standard), also available in 15°
Distance to roof surface:	Approx. 60 mm
Distance from roof edge:	Min. 1200 mm (reduction possible on request)
Max. roof pitch:	Up to 5° without roof anchors, above with additional anchoring
Max. field size:	12 rows × 10 modules = 120 modules
Min. field size:	1 row with 2 modules
Wind load (suction):	Up to 2.4 kN/m²
Snow load (pressure):	Standard: 2.4 kN/m² / Alpine: up to 4.4 kN/m²
System check:	Stability verification by AEROTOOL, based on wind tunnel tests

Dimensions & Materials
Materials:	Aluminum EN AW 6060 T64 (bracket) Aluminum EN AW 6063 T66 (module clamps) Stainless steel A2-70 (screws) Steel with aluminum-zinc coating (ballast trays & wind deflectors) PES building protection mat (pre-assembled)
Optional components:	Ballast trays, ballast stones, side plates, roof anchors, cable ducts
Packaging:	Modular, pre-assembled, stackable – for easy logistics

A notice:
The roof structure must be tested on site for sufficient load-bearing capacity. Ballasting is carried out according to the project-specific design using AEROTOOL. In areas with increased wind loads or seismic activity, a hybrid solution with roof anchoring is recommended.

Roof type	Article number	component	Number
Flat roof south 4 modules x 7 rows	00008	Ballast stone 30x20x6 cm with 8 kg (not included in the package!)	156
	701562	Aerocompact SCS8x20 self-tapping combination screw M8x20	100
	701901	Aerocompact CLP-WD clip for wind deflectors	100
	701902	Aerocompact CLP-M cable tie clip module	100
	706001-2050	Aerocompact BT-2050 ballast tray long 2050mm	14
	706101-2050	Aerocompact S10WD-2050 wind deflector 10° 2050mm	28
	707011	Aerocompact CLM10 middle clamp Click 30-46	50
	707080	Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo	30
	721011	Aerocompact S10FB-PP starting foot S10 with mat	5
	721021	Aerocompact S10EB-PP end foot S10 with mat	5
	721032	Aerocompact S10CNS-PP connector S10/25 with mat	30
	701001-200	Aerocompact PP200/80 building protection mat 200x80x10	90
Flat roof south 7 modules x 4 rows	00008	Ballast stone 30x20x6 cm with 8 kg (not included in the package!)	156
	701562	Aerocompact SCS8x20 self-tapping combination screw M8x20	100
	701901	Aerocompact CLP-WD clip for wind deflectors	100
	701902	Aerocompact CLP-M cable tie clip module	100
	706001-2050	Aerocompact BT-2050 ballast tray long 2050mm	10
	706101-2050	Aerocompact S10WD-2050 wind deflector 10° 2050mm	28
	707011	Aerocompact CLM10 middle clamp Click 30-46	50
	707080	Aerocompact CLE10+ end clamp Click 30-46 L=80mmPo	20
	721011	Aerocompact S10FB-PP starting foot S10 with mat	8
	721021	Aerocompact S10EB-PP end foot S10 with mat	8
	721032	Aerocompact S10CNS-PP connector S10/25 with mat	24
	701001-200	Aerocompact PP200/80 building protection mat 200x80x10	80

Download PDF

We will be happy to advise you on the subject

Our team of experienced photovoltaics engineers, qualified master electricians and skilled project planners combines excellent specialist knowledge with a passionate dedication to our profession. We are here to drive your PV project forward.

Ask a Question About Us